Upvc Replacement Window Handles: The Good, The Bad, And The Ugly

How to Choose uPVC Replacement Window Handles

It is simple to replace a damaged window handle made of upvc by a new one. The first step is removing the screws from the base of your handle (usually the screws are pozidrive).

Then you should be able to pull off the old handle and put the new one. This will improve the security of your home and let you operate your windows from the inside.

Espag handles

Espag handles are the most commonly used handle type that is used on uPVC windows (although they're also found on aluminium and timber windows too). They operate an interlocking mechanism that locks the window after it's shut. The handle is operated by turning a spindle on the back that locks into a gearbox in the window. This is a process of moving a series of locks around the window's perimeter to allow it to be opened. Espag handles are available in a variety of spindle sizes that range from as little as 10 mm or as much as 55 mm. It is essential to select the correct spindle size to fit your window.

In contrast to traditional cockspur handles with an offset lever design that requires a greater hand clearance to operate the handles, espag window handles can be available in either left-handed or right-handed models based on your preference and the orientation of the window. Many of our espag window handles are able to be secured with a Secure by Design specification or key-locked to provide extra security.

The espagnolette handle is a great alternative for those who prefer a more modern look. It's also simple to install. All you have to do is remove the old handle, then remove the screws (typically pozidrive screws) and then replace it with the new one. This is a simple procedure and will bring back the functionality of your uPVC windows.

It could be time to replace the handles on your uPVC tilt-and-turn windows, if they become difficult to use. Most handle mechanisms are industry standard so picking a replacement that is suitable shouldn't prove too difficult. You'll need the handle type and the step height of the current handle. This information is available from your uPVC contractor. This will enable you to make an informed decision and ensure that the window handles made of uPVC you purchase will fit correctly when they are installed.

Tilt and turn handles

These windows provide great ventilation and easy access to the outside. These windows open upwards using side hinges, like casement windows, however they tilt inwards at 90 degrees for air flow and cleaning. These windows come with uPVC composite, uPVC, and aluminium frames. uPVC has the lowest cost and requires less maintenance than aluminum or wood.

A tilt and turn handle is similar to an Espag handle however it is also able to operate an incline-before-turn mechanism. The handles are fitted with a 7mm square spindle at the back that extends into the frame of the window and is placed inside the gearbox of the tilt before turn mechanism. The handles also rotate the window 360 degrees. The standard Espag handles are not able to do this.

The handle has detents at the 90 degree positions, so that when it is turned to a specific position you will be unable to move it past that point, this is to ensure that the window is locked in place for safety and security reasons. The handles come with a key deadlocking system to provide additional security, and are also rated insurance.

These handles are a heavyweight operational handle that has a solid die-cast construction designed specifically for tilt and turn windows. They are also available in a broad selection of finishes such as white and black chrome, satin, gold, and dark bronze.

A large, modern handle that locks in both turn and tilt positions, it is an air-tight draught restrictor that will prevent cold air entering your home when the window is closed. This handle has a curved lever shape that is a lot easier to grasp and offers more leverage when opening the window. This handle is also available in a wide selection of finishes that will suit any style of home, including antique brass, black and white.

Cadenza handles

Cadenza handles offer a unique espagnolette solution that was specifically designed for slim Aluminium profiles. They feature a sturdy grip designed for residential and business applications. A slide bar is operated by a self-contained gearing system inside the handle. The slide bar works with drive pins inside an espagnolette locking rod to secure the window. The Cadenza handle can be deadlocked by a key that stops the window from opening.

This handle is available in left and right handed versions. It comes with a spade length of 48mm. It is also necessary to select a lock that is compatible with the window you have. To identify whether your window is left or right handed, first check the position of the long end of the handle lever. If it points to the left, then you will require a left-hand handle, however if it points towards the right, then you need a right hand window handle.

The straight version of the Cadenza window handle that has an angle blade (W62) is often confused with the angled Cadenza handle, but they are distinct. The angle-shaped Cadenza window handle (W62) requires an angled locking system to perform effectively. The straight handle can't be used with an angled locking system as it could cause the blade component to fracture.

The the handle that is angled is identifiable by a bar of metal that extends from the base of the handle, it is this which distinguishes it from the straight version. The angled Cadenza handle is the most sought-after of these handles and has been available for a long time, but has seen a decrease in sales since the espag lock and espagnolette handle replaced it with new double glazing.

Installation

The replacement of windows made of upvc is a straightforward process that requires only an electric screwdriver and some patience. Identifying  window handle repairs RepairMyWindowsAndDoors  of handle and determining the spindle size is crucial to find a replacement that fits properly. By following these steps, you can ensure that your new upvc handles are safe and secure.

Choosing the correct handle can increase your home's security, reduce drafts, and conserve energy. It is essential to choose a handle that's easy to close and open, as well as lock in the appropriate position when needed. Moreover, having good quality window handles can enhance the appearance of your home.

The first step in replacing a uPVC handle is to take out the old handle and replace it with a brand new one. You'll need to remove the screw caps on either side of the handle. After removing the screws remove the cap that covers the top of the handle. This will expose the first screw, which you'll have to remove with a screwdriver.

Take a measurement of the spindle before installing the cockspur. It is important to measure the spindle length of the handle since it should be at least a 55mm long in order to fit in the uPVC frame. If the spindle of the handle is too small the handle will not be able engage the lock mechanism to open the window.

After you've replaced the handle and tested it, you can check if it's working correctly. Make sure you move the handle back to the locked position and then back again several times. After that, you're ready to put in the new handle and enjoy your new home security.

If you're looking to replace your current uPVC handle or add a new look to your uPVC windows, there are many choices available. It is important to select the handle that best suits your requirements and budget. The handle you select for your uPVC window should be strong and robust, with features that match your home's interior decor. For instance the tilt and turn window requires an entirely different handle than the standard uPVC handle since it allows the window to be opened in both directions.